JAE-Series

High-speed immersion abrasive for removing aluminum and aluminum alloys on all base metals. This product, which can be processed at room temperature, does not use any acid components (nitric acid, phosphoric acid, hydrofluoric acid, etc.) and has little effect on Fe, Ni, Ti / W and these alloy materials.

JAE-Series

Aluminum Etchant

High-speed immersion abrasive for removing aluminum and aluminum alloys on all base metals. This product, which can be processed at room temperature, does not use any acid components (nitric acid, phosphoric acid, hydrofluoric acid, etc.) and has little effect on Fe, Ni, Ti / W and these alloy materials.

Features

  • Al etching solution excluding acid component.
  • Al dissolves at high speed (1 ~ 3 um/min) at room temperature (5 ~ 20 degree).
  • NOx and SOx gases are not generated at all in the treatment process.
  • In the case of pure Al, the inorganic Si component and the reducing metal salt (smut) are not generated.
  • Pure Al concentration can be peeled up to L/10g.
  • It is very economical to use a new solution when the peeling speed is lowered.
  • Removal of polishing solution remaining on metal surface by simple water washing process.
  • The result of immersing three times for 2 minutes is the same as the result of 6 minutes immersion, which is very easy to use.

Specification

AppearanceOrange transparent liquid
OdorOdorless
pH(1:1)14 ±1.0
Specific gravity(g/㎖)1.1 ± 0.02
ConcentrationUndiluted solution
TemperatureRoom temperature ~ 45℃
How it worksImmersion / Immersion ultrasound
Packaging20㎏ (pail) / 200㎏ (drum)

Application Examples

  • Removal of aluminum and aluminum alloy on metal surface
  • < Before Al + Zn alloy treatment >
  • < After treatment at room temperature for 5 minutes >
  • < After removing smut >